서비스 및 지원
열 분석 표준(ISO, ASTM 및 DIN)
열 분석 표준(ISO, ASTM 및 DIN)
차동 주사 열량계 표준
NORM | TITLE |
|---|---|
| ISO 11357 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| ISO 11357 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| ISO 11409 | Plastics - Phenolic resins - Determination of heat and reaction temperatures by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998 |
| ISO 10837 | Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings |
| DIN EN 728 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| DIN 65467 | Aerospace - Testing of thermoset resin systems with and without reinforcement - DSC method |
| ASTM E 794 | Standard test methods for melting and crystallization temperatures by thermal analysis |
| ASTM D 4565 | Standard test methods for physical and environmental performance characteristics of insulation and sheathing for telecommunication wires and cables |
| ASTM D 3895 | Standard test method for oxidation induction time of polyolefins by differential scanning calorimetry |
| ASTM C 351 | Standard Test Method for Mean Specific Heat of Thermal Insulation |
| ASTM E967 | Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers |
| ASTM E968 | Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
| ASTM E793 | Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry |
| ASTM D3895 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
| ASTM D3417 | Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004) |
| ASTM D3418 | Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004) |
| ASTM E1269 | Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
| DIN 51004 | Thermal analysis (TA); determination of the melting temperatures of crystalline materials using differential thermal analysis (DTA) |
| DIN 51007 | Thermal Analysis (TA) - Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC) - General Basics |
| DIN 53765 | Testing of plastics and elastomers; thermal analysis; differential scanning calorimetry (DSC) |
열 중량 분석기 표준
NORM | TITLE |
|---|---|
| ISO 11358 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| ISO 11358 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| ISO 7111 | Plastics - Thermogravimetry of polymers - Temperature scanning method |
| DIN 51006 | Thermal analysis (TA) - Thermogravimetry (TG) - Fundamentals |
| ASTM E 914 | Practice for the evaluation of the temperature scale for thermogravimetry (withdrawn 1994) |
| ASTM E 1868 | Standard test methods for loss drying by thermogravimetry |
| ASTM D 3175 | Standard test methods for volatile substances in the analytical sample of coal and coke |
| ISO/DIS 9924 | Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
| ASTM E1131 | Standard Test Method for Compositional Analysis by Thermogravimetry |
| ASTM D3850 | Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) |
| ASTM D6375 | Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method |
| ASTM D6370 | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM E2550 | Standard Test Method for Thermal Stability by Thermogravimetry |
| ASTM D3175 | Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke |
열 기계 분석기 표준
NORM | TITLE |
|---|---|
| DIN 51005 | Thermal analysis (TA) - Terms |
| DIN 12667 | Thermal performance of building materials and products - Determination of thermal resistance by protected hot plate and heat flow meter methods - High and medium thermal resistance products; German version EN 12667:2001 |
| ASTM D 3418 | Standard test methods for transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry |
| ASTM D 3417 | Standard test methods for enthalpies of melting and crystallization of polymers by differential scanning calorimetry (DSC) (withdrawn 2004) |
| ISO 11359-2 | Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of the coefficient of linear thermal expansion and glass transition temperature |
| IPC-TM-650 2.4.24 | Glass transition temperature and thermal expansion of the Z-axis using TMA |
| DIN 51005 | Thermal analysis (TA) - Terms |
| IPC-TM-650 2.4.41 | Linear coefficient of thermal expansion of electrical insulating materials |
| IPC-TM-650 2.4.24.1 | Time to delamination (TMA method) |
| IPC-TM-650 2.4.41.3 | Coefficient of thermal expansion in the plane, OrganicFilms |
| IPC-TM-650 2.4.24.3 | Glass transition temperature of organic films - TMA method |
| ENV 1159-3 | Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity |
| DIN 53752 | Testing of plastics; determination of the coefficient of linear thermal expansion |
| DIN 53545 | Testing of rubber - Determination of the low temperature behavior of elastomers - Principles and test methods |
| CEI/IEC 1006 | Test methods for determining the glass transition temperature of electrical insulating materials |
| ASTM E 2347 | Standard test method for indentation softening temperature by thermomechanical analysis |
| ASTM E 1824 | Standard test method for assigning a glass transition temperature by thermomechanical analysis: Tensile method |
| ASTM E 2113 | Standard test method for the extension calibration of thermomechanical analyzers |
| ASTM E 2092 | Standard test method for the deformation temperature at three-point bending by thermomechanical analysis |
| ASTM E 1545 | Standard test method for the determination of the glass transition temperature by thermomechanical analysis |
| ASTM D 3386 | Standard Test Method for Linear Thermal Expansion Coefficient of Electrical Insulating Materials1 |
| ASTM E831 | Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ASTM D696 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ISO 11359 – Parts 1 to 3 | Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature |
| DIN 51045 | Determination of thermal expansion of solids - Part 1: Fundamentals |
팽창도계 표준
NORM | TITLE |
|---|---|
| ASTM E831 | Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ASTM A 1033 | Standard method for quantitative measurement and reporting of hypo-eutectoid carbon and low-alloy steel phase transformations |
| ASTM D696 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ASTM C372 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
| DIN 51045 | Determination of thermal expansion of solids - Part 1: Fundamentals |
열 전도성 표준
NORM | TITLE |
|---|---|
| ASTM E1461 | Standard Test Method for Thermal Diffusivity by the Flash Method |
| DIN 30905 | Thermophysical properties of hard metals - Measurement of thermal diffusivity using the laser flash (heat pulse) method |
| JIS A 1412 | Test methods for thermal resistance and related properties of thermal insulation - Heat flux meter |
| ASTM D 5470 | Standard test method for thermal transmission properties of thermally conductive electrical insulation materials |
| DIN EN 821 | Advanced technical ceramics – Monolithic ceramics, thermo-physical properties – Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method |
| BS EN 1159-2 | Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity |
| ASTM C714 | Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method |
| ASTM C518 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ISO 8301 | Thermal Insulation; Determination of Steady-State Thermal Transmission Resistance and Related Properties; Method Using the Heat Flow Meter Apparatus |
| DIN EN 12667 EN 12 | Thermal performance of building materials and products - Determination of thermal resistance by the plate apparatus and heat flow meter apparatus - High and medium thermal resistance products; German version EN 12667:2001 |
고객 서비스
당사 서비스 제공 사항
다음 영역 중에서 선택하세요:
도움말을 통한 도움말
서비스 핫라인
린세이 서비스-핫라인
기술적인 문제로 도움이 필요하거나 기기 사용에 대해 궁금한 점이 있으면 언제든지 서비스 핫라인을 통해 빠른 답변을 받으실 수 있습니다.
서비스 이용 가능 시간은 월요일부터 목요일 오전 8시부터 오후 4시까지, 금요일 오전 8시부터 오후 12시까지입니다.
문의 양식을 사용하여 편지를 보내셔도 됩니다.
영업일 기준 1일 이내에 답변해 드리겠습니다.
이렇게 하면 최대한 신속하게 도움을 드릴 수 있습니다:
- 결함이 있는 기기의 일련번호를 준비해 주세요(정격 플레이트의 전원 플러그 근처).
- 어플라이언스의 위치 (도시 및 국가)를 알려주세요.
- 직접 연락할 수 있는 연락처 정보 (이메일 및 전화번호)를 알려주세요.
