Publications scientifiques sur l'analyse thermique

Les instruments de mesure de LINSEIS testent les propriétés thermiques d’une grande variété de matériaux dans une grande variété d’industries. Les applications collectées ont été mesurées et évaluées dans notre laboratoire ou par nos clients. Les rapports d’application sont actuellement disponibles en anglais, partiellement aussi en allemand. Les liens externes sont régulièrement vérifiés par nos soins. Si l’un des liens ne fonctionne pas, la mesure de l’application sur le site web externe a été supprimée.
Les applications suivantes sont divisées en groupes d’appareils. Veuillez cliquer sur le bouton correspondant pour accéder directement à la vue d’ensemble.

Analyse thermique : DSC, TGA, STA, DIL

APPLICATION

Measuring device

PUBLISHER

PHOTO-DSC AS A VERSATILE TOOL FOR UV CURING SYSTEMS CHARACTERIZATIONChip-DSC with UV optionDownload Paper
Gamma-ray interaction with copper-doped bismuth–borate glassesDIL L74 OpticalPhysica B: Condensed Matter, Vol. 391
Effects of milling time on the development of porosity in Cu by the
reduction of CuO
DIL L74 OpticalDownload Paper
Thermal Properties of Alkali Activated Slag Plaster for Wooden StructuresDIL L75 HorizontalScientific Reports, Vol 10
Dilatometric model for determining the formation of austenite during continuous heating in medium carbon steelDIL L75 VertikalJournal of Thermal Analysis and Calorimetry, Vol 137
Thermal expansion evolution of metastable β Ti-15Mo alloy during linear heatingDIL L75 VertikalIOP Conf. Series: Materials Science and Engineering, Vol. 461
Low Thermal Expansion of Ba0.5Sr0.5Co0.7Fe0.2Mn0.1O3- cathode MaterialDIL L76International Journal of ELECTROCHEMICAL SCIENCE
Dilatometric Study of the Formation of Martensite and of the Effects of Stabilization of Austenite in High-Chromium Pipe SteelDIL L76 and DIL L78 RITA QDTPhysics of Metals and Metallography, Vol. 120
Influence on martensite‐start‐temperature and volume expansion of low‐transformation‐temperature materials used for residual stress relief in beam weldingDIL L78 QMaterials Science & Engineering Vol. 48
Sinter hardening material solutions for high performance applicationsDIL L78 QDownload Paper
Combustion Characteristics of Biomass Charcoals Produced at Different Carbonization Conditions. A Kinetic StudySTA HP 1/2Energy Fuels 2016, Vol. 30
New Copper(II) Coordination Compounds Assembled from Multifunctional Pyridine-Carboxylate Blocks: Synthesis, Structures, and Catalytic Activity in Cycloalkane OxidationSTA PT 1000Molecules, Vol. 24
Synthesis and characterization of hydrophobic, ultra-fine fibres based on an organic–inorganic nanocomposite containing a polyimide functionalitySTA PT 1000Polymers and Polymer Composites, Vol. 27
4-Azafluorenone and Carboline Fluorophores with Green and Violet/Blue EmissionSTA PT 1600Molecules, Vol. 13
GREEN CHEMISTRY FOR THE PREPARATION OF BIO-BASED OIL FROM CATFISH FAT USING A CAVITATION SYSTEMSTA PT 1600Rasayan J. Chem Vol. 12
Crystal structure, synthesis and thermal properties of bis(4-benzoylpyridine-jN)bis(isothiocyanatojN)
bis(methanol-jN)iron(II)
STA PT 1600Acta Crystallographica Section
Asymmetric LSCF Membranes Utilizing Commercial PowdersSTA PT 1600Materials Vol. 13
Characterization of an ilmenite ore for pressurized chemical looping combustionSTA HP 2Applied Energy, Vol. 163
Gasification kinetics during entrained flow gasification – Part I; Devolatilisation and char deactivationSTA HP 2FUEL, Vol. 103
Structurally optimized cupric oxide/polyaniline nanocomposites for efficient humidity sensingTGA PT 1000Surfaces and Interfaces, Vol 18
Effect of Synthesis Oil Palm Mesocarp Fibre (PM) Biopolyol Incorporated with PM Waste Filler on Properties of Polyurethane FoamTGA PT 1000J.Mech.Cont.& Math. Sci., Special Issue-1
Pine Resin Derivatives as Sustainable Additives to Improve the Mechanical and Thermal Properties of Injected Moulded Thermoplastic StarchTGA PT 1000Journal of Applied Sciences Vol. 10
Natural Rubber/Dendrimer Modified Montmorillonite Nanocomposites: Mechanical and Flame-Retardant PropertiesTGA PT 1000Materials Vol. 11
Publikationen Doktoranden

Conductivité thermique : LFA, THB, HFM

APPLICATION

Measuring device

PUBLISHER

Influence of radiation-crosslinking on flame retarded polymer materials—How crosslinking disrupts the barrier effectLFARadiation Physics and Chemistry Vol. 106
Influence of multiwall carbon nanotube (MWCNT) dispersion on ignition of poly(dimethylsiloxane)–MWCNT compositesLFAPolymer for Advanced Technologies Vol. 26
Phase evolution and thermoelectric performance of calcium cobaltite upon high temperature agingLFACeramics International Vol. 41
Correlation between Crystal Structure and Thermoelectric Properties of Sr1−xTi0.9Nb0.1O3−δ CeramicsLFACrystals 2020
Thermo-physical Properties of HR3C and P92 Steels at High-temperatureLFAJournal of Materials and Applications 2019
Suspension Plasma-Sprayed Thermal Barrier Coatings for Light-Duty Diesel EnginesLFAJournal Therm Spray Tech
Suspension Plasma-Sprayed Thermal Barrier Coatings for Light-Duty Diesel EnginesLFAJournal Therm Spray Tech
Low Thermal Conductivity in Thermoelectric Oxide-Based Multiphase CompositesLFAJournal of ELECTRONIC MATERIALS
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal ConductivityLFA + LSR-3Nano, Micro, Small Vol. 11
A Unified Approach to Determining the Effective Physicomechanical Characteristics of Filled Polymer Composites Based on Variational PrinciplesTHBMechanics of Composite Materials
The experimental exploration of nano-Si3N4/paraffin on thermal behavior of phase change materialsTHBThermochimica Acta Vol. 597
Thermal analysis of space foodTHB 100evaluation (PDF)
The Application of Building Physics in the Design of Roof WindowsHFMenergies
Rigid Polyurethane Foams as External Tank Cryogenic Insulation for Space LaunchersHFMIOP Conference Series: Materials Science and Engineering
Effect of ceramic waste powder as partial fine aggregate replacement on properties of fiber-reinforced aerated concreteHFMEngineerings report
THERMAL CONDUCTIVITY OF WOODEN FLOORS IN THE CONTEXT OF UNDERFLOOR HEATING SYSTEM APPLICATIONSHFMWood Technology Institute
Publikationen Wissenschaftler

Thermoélectrique : LSR, Hall, LZT, TEG

APPLICATION

Measuring device

PUBLISHER

High-temperature stability of thermoelectric Ca3Co4O9 thin filmsLSR-3Applied Physics Letter Vol.106
Vacancy filling effect in thermoelectric NbOLSR-3Journal of Physics: Condensed Matter Vol. 27
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal ConductivityLFA + LSR-3Nano, Micro, Small Vol. 11
Thermoelectric properties of Al substituted tetrahedriteLSR-3Journal of Applied Physics, Vol. 127
Study on magnetocaloric and thermoelectric application potential of ferromagnetic compound CeCrGe3LSR-3Journal of Applied Physics, Vol. 126
Microstructure and Mechanical Properties of Pure Copper Wire Produced by Shear Assisted Processing and ExtrusionLSR-3Microstructure Evolution During Deformation Processing
Magnon drag effect in Fe-Co alloysLSR-3Advanced Thermoelectrics
Microwave Irradiation to Produce High Performance Thermoelectric Material Based on Al Doped ZnO NanostructuresLSR-3Crystals 2020
Thermoelectric properties of Al substituted tetrahedriteLSR-3Journal of Applied Physics
Long‑term heat treatment of collector bars for aluminium electrolysis: impact on microstructure and electrical propertiesLSR-3Springer nature: Applied Sciences
Effect of compaction pressure on the thermoelectric properties and microstructure of Cu0.7Ni0.3LSR-4AIP Conference Proceedings
Effect of compaction pressure on the thermoelectric properties and microstructure of Cu0.7Ni0.3LSR-4AIP Conference Proceedings
Effect of alkaline earth dopant on density, mechanical, and electrical properties of Cu0.97AE0.03CrO2 (AE = Mg, Ca, Sr, and Ba) delafossite oxideHCS Hall effect instrumentJournal of the Australian Ceramic Society
New synthesis route of highly porous InxCo4Sb12 with strongly reduced thermal conductivityHCS Hall effect instrumentChemical routes to materials
Effect of the Order-Disorder Transition on the Seebeck Coefficient of Nanostructured Thermoelectric Cu2ZnSnS4LZT-Meternanomaterials
Ingenieure für Dünnschichtanalysen

Analyse de couches minces : TFA, TF-LFA

APPLICATION

Measuring device

PUBLISHER

Thermal Conductivity of Au and Ti NanofilmsTFAMaterials Today Proceeding Vol. 8
Thermoelectric characterization of Bi87Sb13 thin films with varying thicknessTFASemiconductor Science and Technology Vol. 33
Thermoelectric characterization of spin coated PEDOT:PSS films with varying thicknessTFAPSS applications and material science Vol. 215
Heat transport across phase interface in silica aerogel/polymethyl methacrylate compositesTF-LFAPolymer Testing Vol. 76
Inkjet Printed Large-Area Flexible Few-Layer Graphene ThermoelectricsTF-LFAAdvanced Functional Materials
Analysis of heat flow in layered structures for time-domain thermoreflectanceTF-LFAREVIEW OF SCIENTIFIC INSTRUMENTS
High-quality textured SnSe thin films for self-powered, rapid-response photothermoelectric applicationTFANano Energy Vol 72
Thermoelectric properties improvement in Mg2Sn thin films by structural modificationTFAJournal of Alloys and Compounds Vol 797
Enhanced control of self-doping in halide perovskites for improved thermoelectric performanceTFANature Communications volume 10
Thermoelectric porous MOF based hybrid materialsTFAAPL Materials, Vol. 8
New frontier in printed thermoelectrics: formation of b-Ag2Se through thermally stimulated dissociative adsorption leads to high ZT†TFAJournal of Materials Chemistry A
Full Thermoelectric Characterization of Stoichiometric Electrodeposited Thin Film Tin Selenide (SnSe)TFAACS Appl. Mater. Interfaces, 2020
Full High thermal conductivity states and enhanced figure of merit in aligned polymer thermoelectric materialsTFAJournal of Materials Chemistry A, Issue 29, 2021
Ge-Si-Sn-O alloys for uncooled infrared detectionsTFASPIE Defense + Commercial Sensing, 2022, Orlando, Florida, United States
Produktion Semiconductor