SERVICE ET ASSISTANCE
Normes pour l'analyse thermique (ISO, ASTM et DIN)
Normes d'analyse thermique (ISO, ASTM et DIN)
Normes pour les calorimètres différentiels à balayage
NORM | TITLE |
|---|---|
| ISO 11357 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| ISO 11357 | Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2016) |
| ISO 11409 | Plastics - Phenolic resins - Determination of heat and reaction temperatures by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998 |
| ISO 10837 | Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings |
| DIN EN 728 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| DIN 65467 | Aerospace - Testing of thermoset resin systems with and without reinforcement - DSC method |
| ASTM E 794 | Standard test methods for melting and crystallization temperatures by thermal analysis |
| ASTM D 4565 | Standard test methods for physical and environmental performance characteristics of insulation and sheathing for telecommunication wires and cables |
| ASTM D 3895 | Standard test method for oxidation induction time of polyolefins by differential scanning calorimetry |
| ASTM C 351 | Standard Test Method for Mean Specific Heat of Thermal Insulation |
| ASTM E967 | Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers |
| ASTM E968 | Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters |
| ASTM E793 | Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry |
| ASTM D3895 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
| ASTM D3417 | Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004) |
| ASTM D3418 | Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004) |
| ASTM E1269 | Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry |
| DIN 51004 | Thermal analysis (TA); determination of the melting temperatures of crystalline materials using differential thermal analysis (DTA) |
| DIN 51007 | Thermal Analysis (TA) - Differential Thermal Analysis (DTA) and Differential Scanning Calorimetry (DSC) - General Basics |
| DIN 53765 | Testing of plastics and elastomers; thermal analysis; differential scanning calorimetry (DSC) |
Normes pour les analyseurs thermogravimétriques
NORM | TITLE |
|---|---|
| ISO 11358 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| ISO 11358 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| ISO 7111 | Plastics - Thermogravimetry of polymers - Temperature scanning method |
| DIN 51006 | Thermal analysis (TA) - Thermogravimetry (TG) - Fundamentals |
| ASTM E 914 | Practice for the evaluation of the temperature scale for thermogravimetry (withdrawn 1994) |
| ASTM E 1868 | Standard test methods for loss drying by thermogravimetry |
| ASTM D 3175 | Standard test methods for volatile substances in the analytical sample of coal and coke |
| ISO/DIS 9924 | Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
| ASTM E1131 | Standard Test Method for Compositional Analysis by Thermogravimetry |
| ASTM D3850 | Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) |
| ASTM D6375 | Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method |
| ASTM D6370 | Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM E2550 | Standard Test Method for Thermal Stability by Thermogravimetry |
| ASTM D3175 | Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke |
Normes pour les analyseurs thermomécaniques
NORM | TITLE |
|---|---|
| DIN 51005 | Thermal analysis (TA) - Terms |
| DIN 12667 | Thermal performance of building materials and products - Determination of thermal resistance by protected hot plate and heat flow meter methods - High and medium thermal resistance products; German version EN 12667:2001 |
| ASTM D 3418 | Standard test methods for transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry |
| ASTM D 3417 | Standard test methods for enthalpies of melting and crystallization of polymers by differential scanning calorimetry (DSC) (withdrawn 2004) |
| ISO 11359-2 | Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of the coefficient of linear thermal expansion and glass transition temperature |
| IPC-TM-650 2.4.24 | Glass transition temperature and thermal expansion of the Z-axis using TMA |
| DIN 51005 | Thermal analysis (TA) - Terms |
| IPC-TM-650 2.4.41 | Linear coefficient of thermal expansion of electrical insulating materials |
| IPC-TM-650 2.4.24.1 | Time to delamination (TMA method) |
| IPC-TM-650 2.4.41.3 | Coefficient of thermal expansion in the plane, OrganicFilms |
| IPC-TM-650 2.4.24.3 | Glass transition temperature of organic films - TMA method |
| ENV 1159-3 | Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity |
| DIN 53752 | Testing of plastics; determination of the coefficient of linear thermal expansion |
| DIN 53545 | Testing of rubber - Determination of the low temperature behavior of elastomers - Principles and test methods |
| CEI/IEC 1006 | Test methods for determining the glass transition temperature of electrical insulating materials |
| ASTM E 2347 | Standard test method for indentation softening temperature by thermomechanical analysis |
| ASTM E 1824 | Standard test method for assigning a glass transition temperature by thermomechanical analysis: Tensile method |
| ASTM E 2113 | Standard test method for the extension calibration of thermomechanical analyzers |
| ASTM E 2092 | Standard test method for the deformation temperature at three-point bending by thermomechanical analysis |
| ASTM E 1545 | Standard test method for the determination of the glass transition temperature by thermomechanical analysis |
| ASTM D 3386 | Standard Test Method for Linear Thermal Expansion Coefficient of Electrical Insulating Materials1 |
| ASTM E831 | Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ASTM D696 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ISO 11359 – Parts 1 to 3 | Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature |
| DIN 51045 | Determination of thermal expansion of solids - Part 1: Fundamentals |
Normes pour les dilatomètres
NORM | TITLE |
|---|---|
| ASTM E831 | Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ASTM A 1033 | Standard method for quantitative measurement and reporting of hypo-eutectoid carbon and low-alloy steel phase transformations |
| ASTM D696 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ASTM C372 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
| DIN 51045 | Determination of thermal expansion of solids - Part 1: Fundamentals |
Normes de conductivité thermique
NORM | TITLE |
|---|---|
| ASTM E1461 | Standard Test Method for Thermal Diffusivity by the Flash Method |
| DIN 30905 | Thermophysical properties of hard metals - Measurement of thermal diffusivity using the laser flash (heat pulse) method |
| JIS A 1412 | Test methods for thermal resistance and related properties of thermal insulation - Heat flux meter |
| ASTM D 5470 | Standard test method for thermal transmission properties of thermally conductive electrical insulation materials |
| DIN EN 821 | Advanced technical ceramics – Monolithic ceramics, thermo-physical properties – Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method |
| BS EN 1159-2 | Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity |
| ASTM C714 | Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method |
| ASTM C518 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ISO 8301 | Thermal Insulation; Determination of Steady-State Thermal Transmission Resistance and Related Properties; Method Using the Heat Flow Meter Apparatus |
| DIN EN 12667 EN 12 | Thermal performance of building materials and products - Determination of thermal resistance by the plate apparatus and heat flow meter apparatus - High and medium thermal resistance products; German version EN 12667:2001 |
Service à la clientèle
Notre service offre
Choisissez parmi les domaines suivants :
Service et réparation
Nous vous proposons différents services : Entretien, réparation, formation et bien plus encore.
Support à distance
Une aide rapide et compétente via Teamviewer ? Vous trouverez ici des instructions détaillées
Applications
Dans la bibliothèque d’applications, vous trouverez quelques publications avec nos appareils de mesure
Webinaires à la demande
Cliquez ici pour un aperçu de nos webinaires à la demande. Inscrivez-vous et commencez !
Soutien à l'université
Nous soutenons les universités et les hautes écoles dans l’acquisition de nouveaux appareils de mesure.
Aide via le site
Service - Hotline
Linseis Service-Hotline
Si vous avez besoin d’aide pour résoudre des problèmes techniques ou si vous avez des questions sur l’utilisation de l’appareil, vous recevrez toujours une réponse rapide de notre service d’assistance téléphonique.
Notre service est disponible du lundi au jeudi de 8h à 16h et le vendredi de 8h à 12h.
Vous pouvez également nous écrire en utilisant le formulaire de contact.
Nous vous répondrons dans un délai d’un jour ouvrable.
Nous pourrons ainsi vous aider le plus rapidement possible :
- Ayez à portée de main le numéro de série de l’appareil défectueux (près de la prise de courant, sur la plaque signalétique).
- Veuillez nous indiquer où se trouve l ‘ appareil (ville et pays)
- Veuillez nous communiquer vos coordonnées pour que nous puissions vous joindre directement (e-mail et numéro de téléphone).
