Contract measurements - Linseis test laboratories worldwide
Choose a location from our global network family of laboratories that offer you highly specialized test measurements for thermal analysis, thermal conductivity and electrical conductivity.
No matter where you are in the world, our locations in Germany, the USA, China, India and South Korea are available for test measurements and device demonstrations.
You are also welcome to have us carry out permanent series measurements. Under each location you can see the available devices and the costs for the measurements. Send the forms to our laboratory and we will accurately estimate the cost of your measurement.
Why commission a test measurement:
- Cost savings: No expensive purchase of measuring devices or testing of the method before purchase.
- Flexibility: Adaptation to changing requirements without being tied to a specific device.
- Expert knowledge: Access to experienced professionals who carry out measurements with a wide range of materials and conditions on a daily basis.
INTERNATIONAL
Our laboratory locations
Choose from one of the following locations
Overview of the
Order measurements methods
Below you will find an overview of possible measurement methods in our laboratories.
DIL – Dilatometry
- Measurements of the coefficient of thermal expansion (CTE) and the thermal linear expansion between -150°C and 1750°C
- Measurement costs from € 300
- According to ASTM D 696, ASTM E 228, ASTM E 831, ASTM E 1363, ASTM E 1545, ASTM E 1824, DIN 53752
DSC – Dynamic difference calorimetry
- Measurement of enthalpy, phase transitions and specific heat capacity (Cp), measurement from -150°C to 1550°C
- Measurement costs from € 300
- According to ASTM C 351, ASTM D 3417, ASTM D 3895, ASTM D 4565, ASTM E 793, ASTM E 794, DIN 51004, DIN 51007, DIN 53765, DIN 65467, DIN EN 728, ISO 10837, ISO 11357, ISO 11409
TGA – Thermogravimetry
- Measurement of mass change, combustion residue between RT and 1550°C
- Cost of the measurement from € 350
- According to ASTM E 914, ASTM E 1131, ASTM E 1868, DIN 51006, ISO 7111, ISO 11358
STA – Simultaneous thermal analysis
- Simultaneous measurement of TG and DSC to determine mass change and caloric effects between RT and 1550°C
- Cost of the measurement from € 450
- According to ASTM E 914, ASTM E 1131, ASTM E 1868, DIN 51006, ISO 7111, ISO 11358
LFA – Laser Flash Analysis
- Measurement of thermal diffusivity, thermal conductivity and specific heat capacity Cp between RT and 1500°C
- Measurement from 500,- €
- According to ASTM E 1461, DIN 30905, DIN EN 821
THB – Transient Hot Bridge measurement
- Measurement of thermal conductivity between RT and 150°C
- Measurement from 250,- €
TIM-Tester – Termal Interface Materials / Thermal Conductivity
- Measurement of thermal conductivity and thermal impedance between RT and 150 °C
- Measurement costs from €250
- According to ASTM D 5470
HFM – Heatflow Meter
- Measurement of thermal conductivity and thermal resistance (U-value) of insulating materials and insulating materials between 5°C and 80°C
- Measurement from 300,- €
- According to ASTM C518, JIS A 1412, ISO 8301, DIN 12667
LSR – Seebeck, resistance and ZT measurement
- Measurement of the Seebeck coefficient, the electrical conductivity / electrical resistance and the figure of merit (ZT) between RT and 1100°C
- Measurement from 350,- €
- According to JIS R 1650-1
HCS – Hall effect, charge carrier and Seebeck measurement
- Measurement of electrical conductivity / resistivity, charge carrier density, charge carrier mobility, Hall constant, Seebeck coefficient
- Between -150°C and 00°C
- Measurement from 300,- €
- According to ASTM F76-08
RITA – Inductive dilatometry
- Measurement of phase diagrams and phase transformations on steels, CCT, CTT, TTT; measurement of the coefficient of thermal expansion CTE with fast heating and cooling rates
- Between RT and 1600°C
- Measurement from 450,- €
- According to ASTM A1033-04
TFA – Thin Film Analyzer
- Measurement of thermal conductivity, specific heat capacity, electrical conductivity, Seebeck coefficient and Hall coefficient on thin layers and coatings between -160°C and +280°C
- Measurements from 750,- €
TF-LFA – Thin Film Laser Flash
- Measurement of thermal diffusivity and thermal conductivity on thin layers and coatings between RT and 500°C
- Measurement from 1750,- €
How to order a measurement:
- Request an individual measurement offer using our form
- Send samples to the contract laboratory of Linseis Messgeräte
- We carry out the measurements
- After approx. 2-3 weeks you will receive the measurement results and a final report
And here again in detail:
- Please use our contact form to request an individual offer. Please tell us as precisely as possible under which conditions your samples are to be analyzed, how many measurements are planned and what sample preparation is required.
- Please download the two following forms (sample accompanying sheet and measurement order) and fill them out as best as possible.
- Please enclose your measurement order and an accompanying sample sheet with each sample delivery. This allows us to better classify your sample. Please send your samples to the following address: Linseis Messgeräte GmbH, Contract Measurement, Vielitzerstr. 43, 95100 Selb / Germany, E-Mail: [email protected], Subject: Order measurement
- As a rule, the measurement can be carried out within 10-14 days and the result sent by email. The procedure depends on the measurement conditions and the number of samples.
AT A GLANCE
