Linseis > News > Linseis presents its new LaserFlash development

Linseis presents its new LaserFlash development

Over the past decades, the flash method has become the most widely used technique for measuring the thermal diffusivity and thermal conductivity of solids, powders and liquids.

Based on this proven technique, the Linseis Laser Flash for Thin Films (TFA) now offers a whole new range of possibilities for characterizing the thermodynamic properties of thin films with a thickness of 80nm to 20µm.

Did you like the article?

Or do you have any questions? Feel free to contact us!

+49 9287 / 880 - 0

Katharina

+49 9287 / 880 - 0

+49 9287 / 880 – 0

k.hager[at]linseis.de

Articles that you might also like

Farewell to a faithful soul

Thermal conductivity of porous carbon materials

Porous carbon materials, in particular carbon aerogels, are the focus of current research. These materials are characterized by an extremely low thermal conductivity, which is mainly due to their porous structure and low bulk density.

Glass Transition Temperature

The glass transition temperature Tg is a point on the temperature scale at which a polymer or glass changes into a rubbery, viscous state. However, this is not the same as the melting point.

Thermal Interface Materials – Overview and application

Thermal interface materials (TIMs) are used in the field of electronics to ensure efficient heat dissipation and prevent local temperature overloads.

Accurately measure Seebeck – importance in science and technology

The Seebeck effect enables the direct conversion of heat into electrical energy.

How does a pushrod dilatometer work?

A dilatometer is a measuring device for recording the thermal expansion of a material sample. The thermal expansion coefficient (CTE = Coefficient of Thermal Expansion) is calculated from the measurement results.

Crystallization and recrystallization of polymers

The properties of solids depend to a large extent on the arrangement of the particles (atoms and molecules) that make up the substances. If the arrangement is random, the substances are amorphous. In crystalline substances, the particles are arranged at regular intervals and in a fixed pattern.

Curing in thermal analysis

Materials that are processed in a liquid aggregate state generally require a certain amount of time to harden.

Specific heat capacity (Cp) with modulated DSC

The specific heat capacity (cp), often referred to as specific heat, is a fundamental thermophysical property of a material. It says something about the ability to store thermal energy.